SAE AMS2759/3 Heat Treatment, Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
时间:2024-05-10 11:49:57 来源: 标准资料网 作者：标准资料网 阅读：8748
Product Code:SAE AMS2759/3
Title:Heat Treatment, Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements for heat treatment of precipitation-hardening corrosion- resistant and maraging steel parts. Parts are defined in AMS2759.
Product Code:SAE AS6029
Title:Performance Criteria for Laser Control Measures Used for Aviation Safety
Issuing Committee:G10t Laser Safety Hazards Committee
Scope:This document provides guidance for laser operators and aviation authorities to determine the performance criteria that laser hazard control measures shall meet for the operation of an outdoor laser system in navigable airspace. The document does not cover systems intended to deliberately aim and or track lasers at aircraft except for FAA approved purposes, such as visual warning systems, search and rescue, etc.Aircraft operations to be protected include all types that can be reasonably expected to operate in the affected area, which are traveling at speeds and altitudes defined in the Performance/Functional Requirements section. This document does not address all possible aircraft operations, (e.g. the operation of stealth, high-speed (> Mach 1), unmanned aircraft systems, aircraft above 60 000 feet MSL, etc.), including aircraft operating under a waiver from FAA regulations. Depending on the laser system's location and operational characteristics, the proponent may be required to coordinate with local military facilities and with the USAF Space Command. The military may request additional requirements (such as limitations on lasing hours or locations), or they may take actions to avoid the laser location.【英文标准名称】:Rubbersuctionhoseandhoseassemblieswithsemi-embeddedwirehelixforfire-fightingpurposes-Requirementsandtestmethods
【原文标准名称】:消防用半嵌入式螺旋线橡胶吸油软管和软管组件.试验方法和要求
【标准号】:BS3165-2009
【标准状态】:现行
【国别】:英国
【发布日期】:2009-08-31
【实施或试行日期】:2009-08-31
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:弯曲试验;分类系统;尺寸规格;断裂伸长;消防水龙带;消防设备;柔性管;软管接头;液体静压力;低压试验;作标记;性能测试;压力试验;增强的材料;橡胶;吸入软管;拉伸强度;水;金属线
【英文主题词】:Bendtesting;Classificationsystems;Dimensions;Elongationatfracture;Firehoses;Firefightingequipment;Flexiblepipes;Hoseconnectors;Hydrostaticpressure;Low-pressuretests;Marking;Performancetesting;Pressuretesting;Reinforcedmaterials;Rubber;Suctionhoses;Tensilestrength;Water;Wires
【摘要】:ThisBritishStandardspecifiesrequirementsandtestmethodsforClassBrubbersuctionhoseandsuctionhoseassemblieswithasemi?embeddedwirehelixforfire-fightingpurposes.ThisclassofhoseisfurtherdividedintoType1andType2accordingtothedesignworkingpressure(seeClause4).NOTE1Therequirementsandtestmethodsforothertypesofrubberandplasticssuctionhosesforfire-fightingpurposesarespecifiedinBSENISO14557:2002.Thisstandardisapplicabletohosesandhoseassembliesthatareforuseprimarilyforsuctiondutybutthatarealsosuitableforwaterdelivery.NOTE2Allpressuresareexpressedinmegapascals.1MPa=10bar.
【中国标准分类号】:C84
【国际标准分类号】:13_220_10
【页数】:18P.;A4
【正文语种】:英语